With the advancement of society, the development of the economy, and the improvement of people's living standards, various office products have been popularized in many offices. As a stationery product commonly used in offices, the practical method is not complicated, but for more consumers to understand the principle of the punching machine, here is a small series for everyone to introduce about punching. Some simple knowledge of how the machine is used.
At present, the common punching machines on the market mainly include desktop manual styles and large manual punching machines. Of course, the punching machines are generally divided into single holes, double holes and porous ones. In general, how to use our desktop type manual puncher:
1. Stack the files that need to be sorted neatly;
2. Pull out the punching machine and set it as the scale to determine the punching position;
3. Insert the file to be punched (the number of sheets placed in the punching hole should not exceed the specified number of pages). After alignment, press the handle of the punching machine downwards;
4. After releasing the hand, the handle of the puncher automatically rebounds, and the file with the hole is taken out;
5. Use the hardware or plastic binding clip to bind the documents that have been punched.
How to use the manual punch:
1. Fix the manual punching machine on the work surface as required, gently turn the manual punching machine wheel and carefully check the working condition of each part of the punching machine.
2. Check if there is any debris in the punch and lower die position of the puncher and clean it in time. Then add lubricant to the contact position of the puncher guide sleeve and the top of the mold base.
3. Place the material that needs to be punched according to the positioning requirements, and then turn the manual wheel counterclockwise to complete the punching.
4. After the punching is completed, the left hand stops rotating the wheel, and the right hand gently pulls the punched material out from the inside out.
5. Repeat the fourth step to continue punching the next material that needs to be punched (and so on)
6. During the actual working process of the punching machine, the oil storage tank of the punching machine should be kept oil at any time to provide lubrication and cooling for the running parts of the punching machine.
7. After the work is finished, the manual punching machine should be used to clean the garbage, keeping the punching machine clean and dry.
The above is an introduction to the method of how to use the puncher, I hope to help everyone.
Longzhao Technology (Guangdong) Company limited , https://www.princebag.com