Maintenance of blister machine


1. Keep it clean and clean, and remove debris and dirt inside the machine after shutdown.


2. Each sliding guide column, bearing and sprocket must be kept in a good lubrication state, often lubricated


3. The water filter in the gas path should be drained once every working shift, and the oil mister should be refueled frequently to ensure the normal use of the solenoid valve and cylinder.


4. Each work shift should first check the oil level of the vacuum pump (the oil should not be lower than the oil line); the vacuum pump oil should be replaced once a month.


5. Always observe the oil quantity of the oil mister, adjust the oil quantity in a timely manner, and increase the size of the new machine (about 1 day, 1 bottle of oil). After one week of use, it can be reduced to ensure sufficient lubrication of each pneumatic component.

Electric Bath Lift Chair

Electric Bath Lift Chair,Motorized Bath Chair,Electric Bath Chair,Electric Bath Seat For Elderly,Electric Bath Chair Lift

Suzhou Uplift Intelligent Technology Co., Ltd , https://www.upliftecdesk.com