Application skill of electric iron in thermal transfer

Due to the limitation of the calorific value of the electric iron, it is generally not possible to transfer an item with an A4 size (approximately 20 x 30 cm or more). The electric iron must be able to adjust, and the greater the power, the better.

1. First, transfer the iron to the cotton fabric (that is, about 200Â°C), and warm it up until the heat indicator light is on;

2. Place the clothes on the ironing board and use the iron to remove the moisture for a few seconds on the part to be printed.

3, transfer paper printing surface down on the clothing to be transferred to the site, with stickers on the four corners of the paper to prevent paper movement;

4. Lay high-temperature flexible asbestos cloth on the clothes with good transfer paper, and flatten it with four clips on the edge of the ironing board;

5, with the iron slightly back pressure slowly back and forth in the heat transfer cloth with a part of the transfer of hot 20-30 seconds, depending on the size of the time the size of the flexible master;

6. When the transfer paper is not cooled, remove it from the clothing, otherwise it will stick.

Round Fire Pit Burner

Round Bronze Match Light Kit from features their unique Oil Rubbed Bronze finish.
The tray is manufactured from 304 Grade Stainless Steel, which is then subjected to a proprietary treatment involving the tray being hand-sanded and then finished by artisans.
The resulting deep and rich texture beautifully completes any outdoor decor theme.
Match Light Kits, or as often referred to as Match Lit Kits, are the easiest type of Fire Pit ignition system to install, operate and maintain. And these Round Drop-In pans are no exception.
Installation is straightforward. Create a cutout in the top surface of your fire pit structure, one inch larger than the given dimensions of the tray. For example, the 19-inch diameter tray requires a 20-inch cutout.
The tray then drops into the cutout, sitting securely on the generous inch and quarter lip or flange. Using the gas connection supplied with the kit, connect the gas line to the base of the fire pit tray and the other end to your gas supply line, or propane gas bottle.
To light your fire pit, turn on the gas via the suppled gas shut off valve and ignite the gas with a taper or match.
You can adjust the flame height via the gas valve. To turn the fire pit off, just shut the gas valve.
The Round Bronze Match Light Kit is available in two sizes and Natural Gas or Propane versions.
Along with the tray, the supplied burner is also manufactured from Stainless Steel, which makes them both extremely durable and long-lasting.
This product qualifies for the Lifetime Warranty.
To complement and protect this unique looking fire pit tray., also produce matching Oil Rubbed Bronze Fire Pit Lids.
These lids straddle over the fire pit tray and keep out the dust, dirt, and water so that your fire pit is always ready for use.

Name	Stainless Steel Propane Fire Pit Burner
Material	Stainless steel
Size	800*800mm
Steel thickness	2mm
Surface	Pre-rusted
Application	Outdoor
Technology	Laser cut,bending,punching,welding,weathering
Weight	3.5KG
Packing	carton