Barcode printers are office supplies, and everyone must pay attention to the protection of public property during use. Therefore, in order to make everyone better use the bar code printer, I have carefully arranged the ten bar code printers for safe use. I hope that your bar code printer can be more durable and more stable.
1. Bar code printers may interfere with radio, TV and other communication products when working, so please remove these products to avoid signal interference;
2. Place the barcode printer on a level, sturdy table or flat surface;
3. The barcode printer should be away from places with moisture, water and high temperature;
4. Please refer to the specification label on the back panel of the barcode printer to make sure that the power supply specification you are using is correct. Make sure that the power supply voltage switch (110V/230V) matches the power supply voltage in your area. Otherwise, the machine will burn out or Not working properly;
5. When the machine is connected to the power supply, do not open the chassis;
6. The barcode printer can not be disassembled or disassembled, otherwise it will lose the warranty and cause damage;
7. Before cleaning the barcode printer, please cut off the power of the barcode printer. Do not use liquid or spray cleaner to clean the barcode printer. Wipe the barcode printer with a soft cloth or cotton.
8. Do not use a bar code printer at room temperature above 40 degrees Celsius, otherwise the bar code printer will be damaged;
9. The heat dissipation holes around the barcode printer should be blocked and affect the heat dissipation;
10. The power cord of the barcode printer should be placed in a suitable and safe place. The voltage and current that the power cord identifier can carry should be greater than the voltage and current identified by the printer;
Plant Holder Stand,Rope Plant Hanger,Pp Rope Plant Holder,Hanging Potted Plant Rope Holder
Shandong Guyi Crafts Co.,Ltd , https://www.sddoorcurtains.com