1. The basic definition of toys:
1) Toys: One or several items intended for children under 14 years of age.
2). Accessibility: Use your finger to simulate the probe that can be touched.
3). Small objects: when not squeezed, it can be completely accommodated in measuring cylinders with a diameter of 31.7mm, depths of 25.4mm and 57.1mm, toys or toy parts (except soft products such as plush, textiles, chemical fibers, etc.)
4). Sharp point: the tip that can make the indicator light of the sharp point tester shine when testing according to the prescribed procedures.
5). Sharp edge: The sharp edge of the cumulative length of the cut tape when it is tested according to the prescribed procedure is half or more of the length.
6). Baby toys: toys intended for children under 18 months.
7). Non-infant children: toys intended for children over 18 months.
2. Basic requirements for toy safety:
1). The thickness of the plastic film should be 0.0381mm, otherwise it should meet certain conditions (see toy safety standards for details).
2). The accessible edges, corners or parting lines of plastic toys should be free of dangerous edges caused by burrs and spills.
3). The surface coating (paint, electroplating) of toys is prohibited to use paints containing lead or lead compounds exceeding 0.06%. 4). Electronic circuits, mechanical transmission devices or components in toys should be inaccessible.
3. Some toy safety test items:
1). Tensile test: Any part that can be grabbed by a child's index finger or thumb or bitten by a tooth should be subjected to this test, and be applied to the required strength within 5 seconds and maintained for 10 seconds.
2). Drop test: Drop freely from the specified height to the specified media.
3). Reverse battery test: Insert one or several batteries in the opposite direction of the polarity marked in the battery box.
4). Battery short-circuit test: Shorten any two electrodes with a hard straight wire with a diameter of 0.5mm and a length of not less than 25mm.
5). Point test: Use the test tip to press the test port of the point tester with 1 pound force.
6). Sharp edge test: Use the tested edge to hold the rotating shaft of the sharp edge measuring instrument (surrounded by a specified layer of tape) to make the rotating shaft rotate one revolution.
7). Accessibility test: Use your finger to simulate the probe trying to touch any part of the toy, and adjust each joint to any angle during the test.
8). Identification of small objects: Without any force, place the objects to be identified on the test cylinder of small objects at any angle.
9). Sound ring test: Without any force, place the object to be identified at any angle in the opening of the sound ring tester.
10). Bend test: All metal wires in toys that can be bent by children should undergo this test.
4. Toy certification
Toy certification refers to the certification of toy products, excluding toy product testing, toy manufacturer management system certification (such as ICTI certification, ISO9001 certification, etc.). Toy certification can be divided into two major categories: toy 3C certification (applicable to some domestic toys) and toy quality license (applicable to exported toys).
"CCC certification" or 3C certification is the abbreviation of the compulsory product certification system (English name china compulsory certification). It is implemented by governments of various countries in accordance with laws and regulations in order to protect the safety of consumers, animals and plants, the environment and national security. A product conformity assessment system that requires products to comply with national standards and technical regulations. Compulsory product certification is to implement compulsory testing and review of products listed in the "Catalog" by formulating a product catalog of mandatory product certification and implementing mandatory product certification procedures. All products listed in the compulsory product certification catalogue, without obtaining the certification certificate of the designated certification body, without applying the certification mark according to the regulations, shall not be imported, sold out of the factory, or used in business service places.
Children's toy manufacturers The company's Health Equipment Co., Ltd. mainly produces outdoor children's toys, children's slides, kindergarten toys, tabletop toys, outdoor expansion equipment, fitness equipment, naughty castles, etc. Technological enterprises. Website:. Consultation telephone. Our company is happy to serve you wholeheartedly! Factory address: No. 16, Chuangqiang Road, Light Industry Industrial Park, Lucheng District, Wenzhou City.
cat toys interactive,cat toys wand,cat toys balls,cat teething toys
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetscare.com