The thermal transfer method for producing experimental printed circuit boards is considered to be a relatively simple and easy method under amateur conditions. According to the conventional operation, at least a dedicated thermal transfer paper and transfer machine are required. However, some netizens recommend that you can use universal presses instead of transfer machines, and use sticky backing papers (you can go to the lettering shop to find out, that is, they write the rest of the scraps, there are many brands, the production effect is slightly different, you You can find a few more to try) Replace the thermal transfer paper. The stationmaster hasn't come yet and went to try it in person, and quickly recommend it to all of you. If you try it out and how it works, please let us know. Or you can post to this forum. Have a good experience and don't forget to share it.
The specific operation recommendations are as follows:
1. The temperature of the laminator should be adjusted to 180--200 degrees.
2. It is best to pre-heat the CCL in the laminating machine, and then put the ink surface of the prepared drawing on the CCL.
3, can be more than a few times in the laminator (4-8 times) the effect may be better.
4, it is said that even if the use of ordinary copy paper can also be, just wait for the drawings to stick, you have to use water to soak down, not directly peeled off, the effect may be worse.
There may be other papers that can be used as substitutes for thermal transfer papers, or better than thermal transfer papers. Please do more experiments on local materials. Together to solve the common problems encountered by amateur electronics enthusiasts.
Source: Instinct Electronics Technology Studio
The specific operation recommendations are as follows:
1. The temperature of the laminator should be adjusted to 180--200 degrees.
2. It is best to pre-heat the CCL in the laminating machine, and then put the ink surface of the prepared drawing on the CCL.
3, can be more than a few times in the laminator (4-8 times) the effect may be better.
4, it is said that even if the use of ordinary copy paper can also be, just wait for the drawings to stick, you have to use water to soak down, not directly peeled off, the effect may be worse.
There may be other papers that can be used as substitutes for thermal transfer papers, or better than thermal transfer papers. Please do more experiments on local materials. Together to solve the common problems encountered by amateur electronics enthusiasts.
Source: Instinct Electronics Technology Studio
Filling Machine For Beer,Beer Bottling Machine,Glass Bottle Beer Filling Equipment
Water Treatment Machine Co., Ltd. , http://www.nsfillingmachine.com