Do you know the fault site with the highest repair rate of high and low temperature test chambers? Following, Wuhan high and low temperature test chamber manufacturers tell you:
When the high and low temperature test chamber suddenly fails during the test operation, the corresponding fault display prompt and an audible alarm prompt appear on the control instrument.
The operator can quickly check which type of fault belongs to the chapter of troubleshooting in the operation and use of the device, and then you can ask a professional to quickly troubleshoot to ensure that the test is carried out normally.
In the high and low temperature test chamber, the actual humidity will reach 100% or the actual humidity is very different from the target humidity, and the value is much lower. The former phenomenon: it may be caused by the dry gauze on the wet ball sensor. Check whether the water tank of the wet bulb sensor is short of water, the water level in the water tank is automatically controlled by a water level controller, check whether the water supply system of the water level controller is normal, and whether the water level controller works normally. Another possibility is that the wet ball gauze will harden the gauze due to the long use time or the purity of the water supply, so that the gauze can not absorb the water and dry. Just replace or clean the gauze to eliminate the above phenomenon. The latter phenomenon is mainly because the humidification system does not work, check the water supply system of the humidification system, whether there is a certain amount of water in the water supply system, whether the water level control to control the water level of the humidification boiler is normal, and whether the water level in the humidification boiler is normal. If all of the above is normal, then check the electrical control system, which requires professional maintenance personnel to carry out maintenance.
There are two styles choose from, mirror surface and velvet surface.For the display of jewelry, digital electronics, For the watches and other small products, Window Display, Photograph Show, Cube Spin Display, Advertising.
Two Power Supply Modes are Available, Electric Display Stand is for USB power supply, and rechargeable battery power supply (not included in this product). And the maximum load-bearing capacity is differentiated according to the rotation speed, the maximum is 3 kg.
Full set of configuration host, USB cable. In order to prevent wear and tear on the shipment, we will attach a protective film. Please do not think it is old. It is brand new when you tear the protective film.
Turntable,Photography Turntable,360 Degree Electric Rotating Turntable,360 Product Photography Display Stand
Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.synthetichairs.com