Monos is a new powerful extruder from Cincinnati Extrusion Co., Ltd., Vienna, Austria, which demonstrated convincing performance in the production of various types of pipe using the best technology. As their processing length increased to 37D, the output of this new single screw extruder increased by 30% compared to the previous model Proton series. They also occupy less space than earlier models due to the elimination of side-extrusion exhaust equipment from a component supplier and the reduced width of the terminal control equipment.
The new single-screw extruder is available in six sizes. The screw diameter ranges from 45 mm to 150 mm. The output range is between 270 and 1 850 kg/h. It is mainly suitable for optimum melting at low melting point temperatures. All applications of body mass. The extended 37 D processing unit, combined with the unique Power Feed barrier type screw and an innovative compounding section including a screw at the top, can produce very smooth PE and PP pipes.
The control terminal of the Monos extruder is equipped with a steam-water heat exchanger under standard conditions. The monitoring of the cooling circuit provides additional protection for the machine. Monos extrusion molding machines also achieve the best product quality when PE100, PE80, or PP are used to manufacture gas and water bellows. Its long service life is guaranteed by the bimetal barrel and the specially coated screw in the feed section. The achievable torque range provides high productivity at relatively low screw speeds. The Monos extruder is equipped with a maintenance-free direct drive and is available as an option.
The new single-screw extruder is available in six sizes. The screw diameter ranges from 45 mm to 150 mm. The output range is between 270 and 1 850 kg/h. It is mainly suitable for optimum melting at low melting point temperatures. All applications of body mass. The extended 37 D processing unit, combined with the unique Power Feed barrier type screw and an innovative compounding section including a screw at the top, can produce very smooth PE and PP pipes.
The control terminal of the Monos extruder is equipped with a steam-water heat exchanger under standard conditions. The monitoring of the cooling circuit provides additional protection for the machine. Monos extrusion molding machines also achieve the best product quality when PE100, PE80, or PP are used to manufacture gas and water bellows. Its long service life is guaranteed by the bimetal barrel and the specially coated screw in the feed section. The achievable torque range provides high productivity at relatively low screw speeds. The Monos extruder is equipped with a maintenance-free direct drive and is available as an option.
Counter Stool,Leather Bar Stools,Wooden Bar Stools,Bar Stool Chairs
Foshan City Misirui Furniture Co., Limited , https://www.nbmisiruifurniture.com