Panpan drying racks to introduce you, the precautions for purchasing smart drying racks

The decoration of the balcony can be varied. Some people like to decorate the balcony with relatively small capital. Some people like to simply install a drying rack on the balcony, so that it is convenient to dry clothes. Then we choose the balcony to use the drying rack. how to select it, the following Pan Pan racks come to tell you the specific introduction.

Look at the thickness of the drying rod to buy the lifting rack pole is not the thicker the better, but moderate. Too thick a pole that shakes too heavy and is not suitable for lifting. The thickness of the rod should be moderate, and the thickness of 1.0 to 1.2 mm is suitable.

Look at the material of the drying rod. At present, there are stainless steel, aluminum-magnesium alloy, silicon-magnesium-titanium-aluminum alloy on the market. Consumers should distinguish the materials. First, pay attention to the description of the business, choose a reputable business, and secondly, directly apply the ends of the lever. Aluminum alloys tend to bend and cannot be reduced, but titanium alloys do not.

The surface treatment of the surface drying rod of the rod mainly includes polishing treatment, electroplating treatment, spray treatment and electrophoresis treatment. The electrophoresis process is the most complicated, and the surface of the rod is very bright and the grade is the best. The polishing process is the simplest and belongs to the low-end product. The surface of the rod looks very bright and close to the primary color of the aluminum alloy, but it has not been subjected to any surface oxidation treatment. After a long time, the surface of the rod will be black.

Look at the thickness of the wire rope, and look at the flexibility. The thicker and softer the wire rope, the better. The method of identification is to fold the wire rope in half, and let it see if it can be restored. Since the drying rack is used outdoors for a long time, the wire rope is rust-proof and soft.

Looking at the hand crank is the core component of the drying rack. It is very important. When you buy it, you should turn the hand crank directly to see if it is smooth and the sound will not be too loud. The quality of the lifting rack hanger pulley directly affects the lifting and lowering of the drying rack. High-quality pulleys must be characterized by universal swivel flexibility, noise-free, wear-resistant and anti-slot settings. The gears with lower grades on the market are mainly geared, while the higher grades are integrated spring locks.

Look at the steering gear steering, also known as the universal wheel, is mounted on the wall, allowing the wire rope to pass through the internal pulley to maintain the device perpendicular to the hand. The higher grade product steering gear is made of pure copper wheels.

Seeing the selection of the top seat lifting rack top directly affects the service life of the product. The products used in the market are roughly plastic, zinc alloy, iron and aluminum titanium alloy.

Editor: China drying rack net - three and a half