[ Chinese wardrobe net ] I believe that the detachable wardrobe is easy to use and easy to install. Everyone is clear, which is why there are many people who like it, but there are still many people who don’t know how to install it. Xiaobian to learn about the installation rules and steps of the detachable wardrobe.
First, the detachable wardrobe installation code
1. When the simple cloth closet is installed, the cabinet is facing down, and the installation starts from left to right or right to left.
2. Find out the parts of the simple cloth wardrobe chassis and put them together. Note that it is only the bottom part. There are some simple cloth wardrobes with shoe racks. The shoe racks must be installed first.
3. After the assembly of the simple cloth wardrobe is completed, please ensure that the diagonal error of the cabinet is within plus or minus 1MM.
4. After the diagonal measurement of the simple cloth wardrobe is completed, please mark on the two side plates, the position of the laminate or the vertical plate of the back plate is to be nailed to facilitate the nail back plate nail.
5. After the simple cloth cabinet is placed in place, please use the level ruler to measure whether the cabinet is horizontal. If it is not level, please adjust it to the horizontal position. A common method is to place something under the cabinet.
How to assemble a simple cloth wardrobe
In recent years, assembled furniture has gradually been accepted by consumers, and it is widely favored because it is easy to carry and can be folded and can achieve the basic effects of other furniture. The simple cloth wardrobe belongs to a kind of simple wardrobe in the assembled furniture. The cabinet surface is made of non-woven fabric or oxford cloth instead of the traditional wardrobe wood board. The internal practical steel tube supports, light and easy to move, and has the characteristics of beautiful and practical, cheap and convenient to carry. It is especially suitable for the use of renters or students in the bedroom.
Second, the detachable wardrobe installation steps
1, installation equipment
Many of the simple wardrobes that have been bought have steel pipes with the same number, and the same number of steel pipes can be put together. Find out the parts of the chassis and assemble them together. Some wardrobes have shoe racks. It is necessary to first install the shoe racks. In particular, the bottom is the center of gravity of the entire cloth wardrobe. If the installation is not appropriate, the wardrobe will be unstable. The consequences of the collapse.
2. Mid-term installation
After the bottom is installed, place it horizontally on the ground, install the steel pipe in the vertical direction, and then put the cloth cover from the bottom up.
3. Late installation
Then put the remaining steel pipe inside the cloth, then slowly pull the cloth up, cover the whole top, and adjust it slightly until the surface of the cloth looks flat and has no wrinkles, so the installation of the simple cloth wardrobe is basically You're done.
The above is a brief introduction to the installation rules and procedures for the detachable wardrobe, I hope to help everyone.
Stainless Steel Dining Trolley
Steel Kitchen Cart,Steel Kitchen Trolley,Steel Serving Cart,Steel Hot Pot Trolley
Jiangmen T2grand Stainless Steel Kitchenware Factory , https://www.yapamit.com