Inject no less than 2/3 of the clean water into the studio tank, place the container, and turn on the power.
1: After power-on, the dfs will be flashed first, and then the day will be displayed to check if the digital tube strokes are missing.
2: Press the set button for the first time, the indicator light SL is on, enter the temperature setting state, press the up key, up 0.5 °C, press the key, down 0.1 °C.
3: Press the set button for the second time, the first position will display d, enter the set advance control temperature value, and can be adjusted at 0-5 °C. (For example: set temperature is 50 °C, if the temperature is 0.5 °C, to prevent the temperature from being adjusted to 0.5, so heating to 49.5 °C will turn off the heating; if the set temperature is 90 °C, if the temperature is over 1 degree , then adjust d to 1, and finally warm up to 89 ° C to disconnect).
4: Press the set button for the third time. The first position displays C or —, and the temperature deviation adjustment is entered. It can be adjusted from -9.8 to +9.9 °C. (For example, when the display temperature is 0.5 °C smaller than the actual temperature, adjust C to +0.5 °C, which is actually consistent with the display; when the display temperature is 0.5 °C larger than the actual temperature, adjust C to -0.5 °C, so that Show consistent).
5: Press the set button for the fourth time to return to the measurement state. If there is a set value, it will be automatically controlled. At the end of the set value setting, if you do not press the set button to return to the measurement state, the temperature control table will automatically start after 5 seconds. Jump back and work.
6: Press and hold the setting button for 5-8 seconds to automatically reset the set temperature value to 00.0 °C. Before setting the temperature for the first time, if the set temperature value is not normal, it should be reset before use.
7: If it is high-precision temperature control, 3-5 and 3-6 do not need to operate; in addition, press the set button once, the upper row displays -d, indicating that the minimum heating power factor is entered, and the boot automatically is 3, which can be 1-8 adjustment. It is recommended to set it to about 7-8 in a semi-closed state; about 1-2 in a fully enclosed state.
8: After the work is finished, press the setting button for about 5-8 seconds, the temperature control system will automatically reset, and the set temperature will return to 00.0 °C to turn off the heating power. (If the work is finished, do not press the set button to reset, directly turn off the power, then the temperature control system will record the original settings after re-opening).
9: If the water bath is not used for a long time, the water in the studio water tank should be removed, wiped with a soft cloth and dried.
Beijing Jiuzhou Space Science & Trade Co., Ltd. specializes in the production and sales of online groundwater monitors, online dust noise automatic monitors, bayonet runoff monitoring systems, mobile automatic runoff observation systems, online soil erosion monitors, dump bucket automatic flow meters/communities Tipper flowmeter, small diameter flow sediment automatic monitor, steel ruler water level gauge, automatic rainfall station, portable flow meter, portable weather station, soil nutrient speedometer, gas sampling cylinder, lubricating oil three-stage filter barrel
What strikes the eye and the touch most immediately and most powerfully with Yufa's products is our consistent high quality. And we also offer after-sales service to our customers. That's why we earn trust and support both domestic and overseas. The bibcocks are qualified and quality guaranteed, if contact us to get more information.
Bibcocks,Hose Bibcock,Bathroom Faucet Spout,Washing Machine Water Tap,Short Spout Wall Mount Faucet
Kaiping Yufa Sanitary Ware Co.,ltd , https://www.yufabathroom.com