[ China Wardrobe ] Home life has risen from functional demand to quality demand. In addition, it has increased the demand for convenience. If it can be better without losing quality, many simple home furnishings are widely used. application. Among the simple furniture items, the simple cloth wardrobe is one of the most popular furniture, especially in terms of convenience, and is very space-saving. One thing that is not good is that the simple cloth wardrobe needs to be installed by itself, which also makes many people not choose to use the simple fabric wardrobe, because the installation does not know where to start. In fact, the simple cloth wardrobe installation is very simple, just follow the steps to install it. So, what are the installation steps for the fabric wardrobe?
Equipment installation:
The first step: put the same number together. Some of the steel pipes in the closet have the number, you can put them together with the number.
Step 2: Find out the parts of the chassis and put them together. Note that it is only the bottom part. Some have a shoe rack, you must first install the shoe rack.
1. The bottom of the plate is placed and installed.
2. Classification of boards. Such as: top plate bottom plate, neutral plate, etc.
3. Place the classification plate. For example, the top plate is on the upper side and the left side is right, and the bottom plate is in the lower line.
installation:
1. When the cabinet is installed, face down, press left to right or right to left to install.
2. After the assembly of the board is completed, please ensure that the diagonal error of the cabinet is within plus or minus 1MM.
3. After the diagonal measurement is completed, please mark the position of the laminate or the vertical plate on the side plates (side plates) to facilitate the nail back plate nails.
4. After the cabinet is placed in place, please use the level to measure whether the cabinet is horizontal. If it is not horizontal, please adjust it to the horizontal position. A common method is to place something under the cabinet.
5, after the cabinet level, you can install: clothes rail, drawer. Door panel or sliding door. After the telescopic mirror, the handle is installed according to customer requirements.
Precautions:
1. The second step is not to put the rest of the shelves, but to put on the cloth first. Open the zipper of the cloth, and the place where the middle sticks is also pulled open, bottom down. There are some small holes dug in the bottom of the cloth. Pull the cloth from top to bottom according to each hole and pull down the vertical tubes. You can not pull to the bottom first.
3. Put the rest of the pipe in the cloth, then pull the cloth up, cover the top of the pipe, and adjust it until the cloth looks flat and there are no wrinkles.
4. Our installation is complete.
The above is a detailed introduction to the installation steps of the fabric wardrobe. The plastic interface is the most commonly used part, sometimes it is a little tight, and the strong plugging will definitely cause problems. If you accidentally crack it, there is no place to buy accessories. The screw interface is forbidden to be freely configured, and the screws should be tightened after the installation. This way you will get a sturdy cloth wardrobe! You can choose the Shangpin home with a wardrobe, and one-stop customization is now very popular.
Grinding wheel lighters, flint lighters, lighter categories, lighter factories, lighter manufacturers, lighter manufacturers, lighter wholesalers, lighter craftsmanship
Grinding Wheel lighter,Flint lighter,Lighter Category,Lighter Production,Lighter process
Hunan Feituo Automation Technology Co., Ltd. , https://www.feetoolighter.com