[ Chinese wardrobe net ] In the overall wardrobe , wine cabinet or other household panel homes on the market, some manufacturers use solid wood particle board (particle board) as the substrate, and some manufacturers use the density board as the substrate. But do you know about its substrate? As a wardrobe purchaser, it is very important for us to choose a good product from the unscrupulous market wars and protect our rights and interests. Let's take a look at the advantages and disadvantages of the MDF and solid wood particle board!!
Solid wood particle board is a kind of shredded material made of wood or other lignocellulosic material. After applying adhesive, the artificial board is glued under the action of heat and pressure. The principle is the same as the MDF.
advantage:
1) The inside of the solid wood particle board is a granular shape with a cross-stack structure. Therefore, the nail holding power is good, and the nails and screws can be nailed. These machinable properties are significantly better than MDF.
2) The density of solid wood particle board is relatively high, and the wood fiber particles in the board are larger, which retains the essence of natural wood. The content of solid wood particle board in the use of adhesive is generally less than 5%, and the environmental protection is better.
3) The solid wood particle board has small warpage deformation, good dimensional stability, high strength, good stiffness, and it is not easy to bend when hanging heavy clothes. The wood-based panels currently used in the European furniture market are mainly solid wood particle boards.
Disadvantages: The flatness of solid wood particle board is not as good as that of MDF. It is difficult to make curvature and shape.
In addition, the MDF is also a MDF. It is a man-made fiber made from wood fiber or other plant fiber. After being crushed, separated by fiber, dried, and then urea-formaldehyde resin or other suitable adhesive is applied, and then hot pressed. Plate.
Advantages: The material is relatively thin, and the cut surface will be well sealed when it is edged, so it is not easy to open the glue. It is easy to press into various shapes and it is easy to make a shape, so there are usually more door panels or back panels.
Disadvantages: Because the substrate is a powder, it uses more glue than the particle board, which is more likely to cause environmental problems. Secondly, due to the high glue content of the MDF, the internal structure space is small, and the moisture resistance is poor. The density of one piece is soaked in water for 24 hours. After ten hours, it is obvious that the MDF rises and deforms.
At present, in the European market, due to environmental considerations, it is basically based on solid wood particle board, and most of the domestic manufacturers use solid wood particle board as the cabinet substrate.
In fact, it is better to use both in a closet. The backboard uses MDF, and the laminate uses solid wood particle board, which can not only take advantage of the flatness of the MDF, but also make the product more beautiful. It also utilizes the environmental advantages of solid wood particle board to maximize environmental protection. Living environment.
The above is the advantages and disadvantages of the two kinds of plates that I introduced for you. I hope I can give you some reference!!
Clear Pvc Tubing,Clear Flexible Tubing,Clear Plastic Hose,Hose Transparent
YIYANG PLASTIC PRODUCTS CO., LTD , https://www.yiyang-hose.com