Common faults and elimination of water pumps-no liquid supply, insufficient liquid supply or insufficient pressure

Common faults and elimination of water pumps-no liquid supply, insufficient liquid supply or insufficient pressure
1) The pump is not filled with water or properly vented;
Remedy: Check that the pump casing and inlet line are completely filled with liquid.
2) The speed is too low;
Elimination measures: Check whether the wiring of the motor is correct, the voltage is normal or the steam pressure of the turbine is normal;
3) The system head is too high;
Elimination measures: Check the head of the system (especially friction loss).
4) The suction stroke is too high;
Elimination measures: Check the existing net head (inlet pipeline is too small or too long will cause a lot of friction loss).
5) The impeller or pipeline is blocked;
Elimination measures: Check for obstacles.
6) The direction of rotation is wrong;
Remedy: Check the direction of rotation.
7) There is leakage of air or inlet pipeline;
Elimination measures: Check the inlet pipeline for cavitation and / or air leakage.
8) The packing or seal in the stuffing box is worn out, causing air to leak into the pump casing;
Elimination measures: Check the packing or seal and replace as necessary, check whether the lubrication is normal.
9) Insufficient suction head when pumping hot or volatile liquids;
Elimination measures: increase the suction head, consult the manufacturer.
10) The bottom valve is too small;
Elimination measures: Install the correct size foot valve.
11) The immersion depth of the bottom valve or inlet pipe is not enough;
Elimination measures: Consult factory for correct immersion depth. Use baffles to eliminate eddy currents.
12) The impeller clearance is too large;
Elimination measures: Check whether the gap is correct.
13) Impeller damaged;
Elimination measures: Check the impeller and replace it as required.
14) The impeller diameter is too small;
Elimination measures: Consult factory for correct impeller diameter.
15) The position of the pressure gauge is incorrect;
Elimination measures: Check the correct position, check the outlet nozzle or pipeline

Cat Scraching

Scraching Post For Cats,Breathable Rattan Pet Bed,Small Sturdy Cat Scratcher,The Purrfect Gray Cat Tree

NINGBO BRIGHT MAX CO., LTD. , https://www.brightmax-equine.com