Electromagnetic vibration table for problems encountered in the use of customer operations, the Division I list the corresponding solutions, for example, the following four points, electromagnetic vibration table for you reference operator.
First, the vibration table can not be connected to the computer control (with microcomputer models)
1 , check the computer peripheral line is connected properly , please reconnect and confirm it again
2. Check RS232 connection port is connected and there is no good contact, and a need reclosing
3 , then check the vibration box control box power switch is open , if not open, press to turn ON (that is, turn on the vibration table power supply)
4 , and then check RS232 serial computer settings are COM2 or COM1, replace the settings on the line
5 , whether to open the program screen correctly , is it correctly set , refer to the computer operation manual setting procedure
Second, the electromagnetic vibration table can not stop after setting time
1. Check if the operation steps are set correctly . Follow the instructions again.
2. Check if the internal code is correct . Check the parameter list and check it again.
3 , shut down, reset the internal code, re-set according to the operating procedure
Third, when the desk body work abnormal sound
1. The abnormal sound of the contact surface of the test article is bound to the naked eye. Please re-bind or check the body.
2. Check whether the spring steel sheet inside the table body is broken. If the size is good (length, width and thickness), you can tell the manufacturer to send it to your company.
Fourth, the computer program appears some numbers and prompts to contact with xxx company to provide authorization code
Check whether the communication line is broken or the insulation is peeled off . Check whether the computer is working properly (do not work with the vibration table)
And confirm whether your company has added other external equipment or other uses to your computer.
Note : sometimes the vibration table may cause missing files or forget the password due to improper operation or modification . In this case, contact the manufacturer and send it back to the computer host to reset .
Professional create value, Dongguan Haida cast quality! Dongguan Haida equipment specializing in the production of carton compression testing machine , burst strength testing machine, drop test bench , vibration testing machine and other packaging testing equipment, welcome to call!
For more detailed product series and related technical parameters, please contact:
National Unified Service Hotline: 400-0711-808
Haida International Instrument: 0769-89280808
company website:
Article Source:  Dongguan Haida International Instrument    Copyright, for reprint, please indicate the source
1)the material is abs plastic. Fresh abs material.
2)It has 5 jets, rain, mist, massage, rain+massage, rain+mist, which can switch by the faceplate handle. 3)The thread is G 1/2, which is international standard. So you will not worry about the connection with Shower Hose
4)The color is chrome, you can change the faceplate and the nipple color
1.Made in ABS plastic with High-gloss chromed finished.
2.With differernt jet settings, adjustable with turnable shower wheel.
3.With TPR shower nozzle,ANTI-LIME scale,Easy to clean.
4.Easy-to-hold Handle.
5.Quick and easy assembly.
6.Suitable for commercial 1/2" connections.
7.Perfect working with 2-5 Bars water pressure.
8.Care Instructions: Clean the chromed surfaces only with clear water and a soft cloth or chamois leather.
9.Do not use aggressive chemical or abrasive cleanser (eg.inappropriate or handling,scrubbing brushes or similar may could affect the surfaces).
10.Attention! Do not use if water pressure is extremly high and if water temperature is above 65°
Plastic Shower,Plastic Hand Shower,Plastic Dual Function Shower,Handheld Plastic Shower
Yuyao Sanyin Bathroom Technology Co Ltd , https://www.chinasanyin.com