[ Chinese wardrobe network ] Many wardrobe users have encountered the problem of wardrobe deformation, and then immediately find a wardrobe manufacturer to discuss. Indeed, in the process of making and processing the closet, there will be many reasons for the deformation of the finished wardrobe in the later stage.
Five factors that lead to the deformation of the wardrobe
First, the parts are stacked to cause deformation.
In the production, some operators are convenient for the drawing, the plates are stacked at random, or the plates of the stacked plates are not flat, and even the plates are inclined against the wall, so that the plates are before entering the next process. It has been deformed by its own weight.
Second, the finishing process causes deformation.
During the finishing process, due to improper use of the process and raw materials, the plate is deformed and deformed as the internal stress of the coating changes.
Third, the effect of finishing putty.
In the process of painting the door parts, many manufacturers use pig's blood putty or glue to prepare the putty in order to reduce the cost. Because these two kinds of putty contain a lot of water, the substrate commonly used for plate furniture - medium density fiberboard and particleboard The hygroscopicity is particularly strong, so when one side of the door panel member is not put with putty and the other side is coated with such a water-rich putty, the door panel member is hygroscopic and deformed.
Fourth, the impact of the drying process.
Many manufacturers are in production. When the board is coated with putty or paint, it should be placed on the drying rack for natural drying. If the rod of the drying rack is too sparse or uneven, the door parts will be dried in the paint. Bending deformation was found during the process.
5. The improper treatment of the paint causes the deformation of the plate furniture parts.
The influence of the internal stress of the coating will form a certain coating after curing. Even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, it will become the main cause of bending deformation of the door component. one.
In addition, the following aspects should be noted in the maintenance of the wardrobe:
1. Avoid using irritating and corrosive chemicals such as alcohol and detergents that are easily damaged by wood.
2. Wooden wardrobe, usually just wipe with a clean rag, but if it is dirty, you can use soap or neutral detergent, wipe it with a damp cloth.
3. Ultraviolet rays are also destructive to wood furniture. Therefore, it is necessary to use cloth or curtains to avoid sun exposure.
3. If you want to wax, it is best to choose a wax with a high concentration and solid, free of silicon, so as not to damage the paint surface.
Pet Shampoo,Puppy Shampoo,Pet Dog Cat Shampoo,Cat Shampoo Conditioner
DELIN HAIR COSMETICS , https://www.arganshampoofactory.com