When the temperature and humidity controller of the high and low temperature test chamber shows abnormal temperature: please check whether the over-temperature protector of the control panel is set at the position of 150 ℃. Please check whether the solid-state relay in the temperature part is burned out and short-circuited. If the heater is not burned out, please use the AC voltage range of the three-meter meter. The voltage range is turned to 600 volts. Place the red and black bars on the line marked with T. On both sides of a solid state relay, set the temperature setting value of the humidity part to 0 ° C. At this time, the indicator light of the solid state relay of the temperature part will not light up. If the measured voltage value does not change, it is maintained below 10V It means that the solid-state relay is burned and short-circuited.

The temperature control instrument of the high and low temperature test chamber uses imported instruments, with PID adjustment, SSR output, fast auto-tuning, digital display, and convenient reading. The box door, working room and shell are equipped with high temperature resistant sealing strips and pressing devices, which can effectively ensure the sealing and thermal insulation performance of the box body. The French "Taikang" original fully enclosed compressor used in the refrigeration system ensures the low temperature stability of the high and low temperature test chamber. The high and low temperature test chamber has over-temperature protection, overload protection of the control circuit, short-circuit protection, safe and reliable use. The studio and sample rack are made of stainless steel, and the outer box is made of high-quality cold-rolled steel plate with beautiful appearance. If you want to know the detailed parameters of the high and low temperature test box price, please continue to pay attention to this website.
This product was launched in 2019.
It's been 3 years, very popular in China and Europe.
The main ingredient is PEG-PLLA-PEG, balanced salt and water.
It is liquid gel, can be used directly. Don't need to add other things. Very convenient.
Let me explain here. Poly (L-lactic acid) PLLA is a high molecular polymer.
It is insoluble in water. So Reborn PLLA Dermal Filler is a milky white mixture after mixing. PLLA microspheres are mixed in solution and then injected into the human body to stimulate collagen. But Reborn PLLA Hydrogel Filler, which is a liquid gel.
We turn it into a liquid through some technical methods. You don't have to mix it with sterile water for injection. Reborn hydrogel can be injected directly.
Hydrogel can solve skin problems such as fine line, acne marks, redness, eye bags, pinples, etc.
It can be used on the face, neck, hands, body.
Hydrogel is for mesotherapy, can be used by mesogun, microneedling, hand needle.
This is the before and after photo of Reborn PLLA Hydrogel filler.
Hydrogel Injections,Hydrogel Gel Injections,Hydrogel Filler,PLLA Hydrogel Injection
Rimless Industry Co.,Ltd. , https://www.rebornplla.com