First, the tips before use
(1) Stir well with a clean wooden stick after opening the can, do not use the method of shaking;
(2) The open-can state of the water-based polyester paint varnish is a milky white liquid, which is a colorless, transparent and bright paint film after drying;
(3) used between 10 ° C and 35 ° C and a relative humidity of 30% to 70%;
(4) It can be used on crude paint surface.
Second, lacquer preparation
(1) Old paint film: If there is damage or groove marks, it is necessary to polish all the paint film in a weak place. Apply water-based polyester paint to the complete paint film and sand it evenly.
(2) New wood surface: Before the board is not scribbed, use a water-based polyester paint primer to add 50% water to brush it again. In order to prevent contamination during the production process, it is necessary to pay attention to the uniform coating and not stacking before drying.
(3) Make-up nails: Use special putty, mix color or toner to the same color as wood, repair nail eyes, pay attention to not add wood grain.
Third, the coating method
(1) The general primer is brushed. The topcoat can be brushed or air sprayed;
(2) It can be diluted with appropriate amount of water, usually 10%, preferably with less water. The amount of water added is subject to no obvious brush marks and no sag;
(3) Between painting time: 2-4 hours, depending on the temperature and humidity of the environment. If the humidity is higher than 90%, the drying time of the paint film may be as long as one day;
(4) Curing and maintenance period of 7 days, the longer the film, the harder the film.
Fourth, grinding method
(1) Grinding: After the primer is finished, use sandpaper of 600# or more to fully polish it. Be careful not to wear through the paint layer.
(2) Dry grinding or water grinding. If the filling effect is still not satisfactory after grinding, the primer can be applied again. Before the last coat of paint, use 1000# sandpaper and finely ground.
Fifth, brushing the topcoat
(1) Typical application: 3 times primer + sanding + 3 times top coat;
(2) If it is necessary to completely block the wood grain, it may be necessary to apply the primer more than 4 times for the material with deep wood grain.
Six, matters needing attention
(1) Use Woer's water-based wood lacquer, pay attention to thin coating, not thick coating;
(2) All waterborne polyester lacquers and tools, wood shall not be contaminated with grease, oil paint or Tianna water;
(3) All tools can be cleaned with water, suspended after work or in the middle, and cleaned with water immediately;
(4) The paint should be stored in a cool, ventilated, non-freezing place. After the paint is poured out, there is excess paint in the tank, which needs to be tightly closed immediately.
Comal Up
We are a manufacturer specialize in horeca kitchenwares with heavy duty, Stainless Steel Stock Pot/Stainless steel gn pan/Chafing Dish are our hotselling.
And Griddle Pan and Trolley cart are sell well in European market.
Stainless steel concave comal(include comal up and Comal Down style),used to fry tacos,quesadillas,gorditas and pambazos.
Our product advantages:
1. Durable stay-cool ears
The ear is welded and strengthened with 2 rivets, which makes the bearing capacity stronger and more stable. It's portable and easy to grasp.
2. Sanding Surface Treatment
It is durable, easy to clean and not easy to scrape and wear.
3. Sinking bottom design
Designed for outdoor portable stoves. The bottom is down that give you more space to cook.
4.Using the high quality food grade stainless steel raw material, which has the advantages of good hardness,heat stability,tensile property and corrosion resistance.
5. Customized raw materials, option SS201, SS443 and SS304, etc.
6. Applicable to all kinds of stove heating, such as induction cooker, gas stove, electric furnace, electric ceramic stove, etc.
Comal Up,Stainless Steel Comal,Comal Pan Up,Comals Tacos Cookware
Jiangmen Pengjiang Hetang Meijin Stainless Steel Products Factory , https://www.ukwkitchenwares.com