1. The initial section of each large slide shall be at least 350 mm long, and the downward angle of the initial section shall be between 0 and 5 degrees (measured from the centerline of the initial section);
2. In any part of the glide section, the angle cannot be greater than 60 degrees (angle with the horizontal plane), and the average angle cannot be greater than 40 degrees. The angle of the taxi section needs to be measured from the center line.
3, slide out the maximum angle of 10 degrees;
4, the exit height ≤ 200mm or 350mm (depending on the sliding section to determine the distance);
5, closed sliding bucket should adopt a transparent way to avoid safety problems and the inner diameter can not be less than 750mm.
6, the use of large slides qualified products, production conditions meet the standards of the manufacturers.
Tarte Jelly Glaze,Tropic Lip Glazese,Velvet Lip Glaze,Glaze Lip Gloss
Hangzhou Shibode Technology Co., Ltd. , https://www.inblooming88.com