As we all know, printers are one of the essential equipment in people's daily work. However, due to the increasing frequency of printer use, the update of various consumables has become very frequent. Many small partners have a headache for this. For more sophisticated equipment such as printers, it is really a nuisance to replace consumables. The following is the story of the printer's toner application.
The quality of the printer's toner directly affects the printer's printing performance, so you need to pick a reliable toner before adding toner to the printer. It is recommended that the small partners should purchase the relevant consumables through the formal consumables market or online platform like Colyp Mall, which can ensure the direct supply of the factory. Well, let's get down to business, printer plus toner is generally divided into the following steps:
1, preparation work
First, buy a bottle of toner for laser printers on the market. Also prepare tools for powdering laser printers, including: screwdrivers, diagonal pliers (point pliers), cotton, brush, leather tiger (or hair dryer).
2, remove the toner cartridge
First remove the toner cartridge from the printer, locate the fixing screw on the drum cover, use a screwdriver to remove the screws (usually 2) that secure the drum cover, and collect the screws. Use a "one" screwdriver to gently pry the snap on the cover and then open the print cartridge cover.
At this time, you can see that the drum cartridge is divided into two parts. The waste toner box is connected to the drum core, and the toner cartridge is the part with the spring pressure. When adding toner, new toner should be added to the toner cartridge. When the drum cover is opened, the waste toner remaining in the drum cartridge is spilled. To prevent contamination, a newspaper should be placed on the table in advance.
3. Clean up residual toner
Many toner cartridges do not actually use up the toner when they are replaced. In the waste toner box or toner cartridge, some toner is often left. If it is not cleaned, the added toner and the original toner may be because Incompatible with the formation of massive solids, so be sure to clean the original toner before adding toner.
When cleaning, first clean the toner in the waste toner box and toner cartridge, then use a brush to gently remove the toner remaining on the edge of the toner cartridge.
Where the brush is not cleaned, the used toner can be cleaned with a leather tiger or a hair dryer.
4, add new toner
After the above cleaning, you can add new toner to the drum cartridge. When you add it, unscrew the purchased toner bottle cap, tear off the sealing paper at the bottle mouth, and slowly pour the toner into the toner cartridge. In the box until it is full.
To prevent the toner from spilling out when pouring toner into the toner cartridge, you can use a paper pad at the toner cartridge opening to facilitate the addition of toner to the toner cartridge.
After the toner is added, close the toner cartridge and the waste toner box and tighten the screws. Then wipe the toner around the toner cartridge with a clean brush or a soft cloth. Before placing the toner cartridge in the printer, shake the toner cartridge from side to side with the hand so that the toner in the toner cartridge is evenly distributed so that it can be printed normally.
Strollers Over 6 Months,Best Stroller For 7 Month Old,Best Stroller For 10 Month Old,Best Stroller For 12 Month Old
NINGBO BABY FIRST BABY PRODUCTS CO.,LTD. , https://www.maxinfcarseat.com